Remmers Long Life Stain UV+




Board Thickness


Board Full Width


Timber Species


Board Profile



In Stock

Price excludes VAT

£49.99 per 2.5L
£89.99 per 5L 

£299.99 per 20L



Top GERMAN Quality product

Weather-resistant and UV-resistant

High UV protection for light colours and clear UV+

Dirt-repellent and easy to maintain

Block resistant (in accordance with Code of Practice HO.03)

Good flow properties

Free from biocides and cobalt



For use on exterior wood

Available in 12 colours 

Dimensionally stable wood building elements: e.g. windows and doors (including their interior surfaces)

Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking

Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses

Biocide-free finishing coat for impregnated wood, e.g. garden furniture

Clear UV+ can also be used as a sacrificial layer over pigmented variants to prevent the wood from darkening

First coat: 100 ml/m² Second coat: 60 ml/m²


Requirements for the substrate

Limited dimensionally stable wooden construction elements and dimensionally unstable timber components: the maximum permissible timber moisture content is 18%.



Thoroughly remove any dirt, grease and non-adhering old coatings.

Sand grey and weathered wood surfaces down to sound, bright wood.

Remove loose and torn knots as well as resin that bleeds and clean with a suitable product (e.g. V 101 thinner, thinner & brush cleaner).

For exterior wood that requires protection against soft rot and blue stain, pre-treat with Wood Protection Primer*, Wood Protection Cream* or HK Stain* (not required for interior wood).

When painting exterior wood with the colour Clear UV+, the wood must first be pre-treated with Wood Protection Cream Clear.

Observe BFS Code of Practice No. 18 "Coatings on Wood and Wooden Working Materials in Outdoor Areas".

Thoroughly sand any old coatings that are still intact.


Conditions of use:

The temperature of the material, the environment and the substrate should be between +5 ° C and +25 ° C

Apply by brush.

Apply in the direction of the grain.

Carry out light intermediate sanding on particularly elegant surfaces prior to applying a finishing coat.

Apply a second coat once the first has dried.

If required, Clear UV+ can be used as a third coat to permanently fix the desired colour (sacrificial layer that is renewed when renovating).

This procedure can also be carried out on surfaces that have been pre-treated with HK Stain or Wood Protection Cream.

This procedure is not advisable on substrates that have been treated with white products (darkening, yellow tint from Clear UV+).

End grain areas should be painted over with several coats of the material in the corresponding colour to protect against water absorption.

Windows and exterior doors require 3 coats.

All colours can be mixed with one another.

Seal opened containers well and use contents as soon as possible.


Performance Tips:

By making trial surfaces, the compatibility of the material with the substrate and adhesion must be checked.

When applying further layers of other paint materials, it is recommended to check the adhesion.

In the case of wood species with a high content of water-soluble tannins, such as oak, red cedar, afcelia, redwood etc., precipitation may cause their washing away. This may result in discoloration on light-colored masonry or plaster.

The lower surfaces of the front cuts of the wood should be trimmed to obtain a drip.

Check colour and compatibility with the substrate by applying a trial coat.

Make sure that the area is well ventilated during processing and drying.

Each layer of medium-build stain results in a more intense colour and a glossier finish.

Compatible with plastics and bituminous materials once dry.

Areas that are being coated or dried should be protected against rain, wind, sunlight and condensation.

Mechanical damages, especially to clear coatings, must be immediatly repaired with "clear UV+" to prevent discolouring, caused e.g. by blue stain.

Risk of self-ignition (DGUV information brochure 209-046).

The product should not be applied at the same work stand as NC-based varnishes or stains. Collect any textiles soiled with the product (e.g. cleaning rags, work clothing) in fire-resistant waste containers and dispose of properly.



Approximately 12 hours at 20 ° C and 65% relative air humidity.

Low temperatures, poor ventilation and high air humidity extend the drying process.

Depending on the type of wood (e.g. larch), the drying time may take longer.



The material is delivered ready for use



Natural bristle brush

Clean tools immediately after use with "Brush cleaner, thinner" (Art. 1345)

Dispose of dirty liquid in accordance with the regulations.


Storage/ Shelf Life:

In a carefully closed package, in a dry and cool place out of the reach of children, protected against direct sunlight and frost, in well-ventilated rooms. Smoking is not allowed in these rooms.



Technical Data Sheet 

Safety Data Sheet

Color Chart


0.0 0 Reviews
Leave review
Upload Photos