Price excludes VAT

£49.99 per 2.5L
£89.99 per 5L 

£299.99 per 20L

 

Properties:

Top GERMAN Quality product

3 in 1: impregnation, priming and stain

Protects wood from moisture and provides effective protection against blue stain fungi

Reduces the risk of rot when used in conjunction with constructive wood protection measures

Increased solids content provides protection against nesting wasps

Protective film against mould and algae

Breathable

Good penetration

Subsequent treatment without sanding

 

 

Description:

For use on exterior wood

Available in 5 tone of grey colours range

Approx. 100 ml / m² of one coat

Wood which is not in ground contact, in accordance with DIN EN 335-1, use classes 2 and 3

Wood building elements with no dimensional stability: e.g. fences, framework, carports, planking

Wood building elements with limited dimensional stability, e.g. folding shutters, matchboarding, summerhouses

Dimensionally stable wood building elements (when used as a primer only): e.g. windows and doors

Primer, intermediate and finishing coats

 

Requirements for the substrate

Limited dimensionally stable wooden construction elements and dimensionally unstable timber components: the maximum permissible timber moisture content is 18%.

 

Preparations:

Completely remove old coatings (e.g. paints or medium-build stains), bark, bast and dirt.

Remove loose and torn knots as well as resin that bleeds and clean with a suitable product (e.g. V 101 thinner, thinner & brush cleaner).

Smooth, planed wood surfaces should be sanded and dusted before the coating is applied to ensure better absorption.

Observe BFS Code of Practice No. 18 "Coatings on Wood and Wooden Working Materials in Outdoor Areas".

 

Conditions of use:

The temperature of the material, the environment and the substrate should be between +5 ° C and +25 ° C

Paint with a brush

Apply in the direction of the wood grain.

After drying, apply a second coat.

Tampered packaging should be carefully closed and the contents used up as soon as possible.

 

Performance Tips:

By making trial surfaces, the compatibility of the material with the substrate and adhesion must be checked.

When applying further layers of other paint materials, it is recommended to check the adhesion.

In the case of wood species with a high content of water-soluble tannins, such as oak, red cedar, afcelia, redwood etc., precipitation may cause their washing away. This may result in discoloration on light-colored masonry or plaster.

The lower surfaces of the front cuts of the wood should be trimmed to obtain a drip.

 

Drying:

Approximately 12 hours at 20 ° C and 65% relative air humidity.

Low temperatures, poor ventilation and high air humidity extend the drying process.

Depending on the type of wood (e.g. larch), the drying time may take longer.

 

Dilution:

The material is delivered ready for use

 

​Tools/cleaning:

Natural bristle brush

Clean tools immediately after use with "Brush cleaner, thinner" (Art. 1345)

Dispose of dirty liquid in accordance with the regulations.

 

Storage/ Shelf Life:

In a carefully closed package, in a dry and cool place out of the reach of children, protected against direct sunlight and frost, in well-ventilated rooms. Smoking is not allowed in these rooms.

 

Downloads:

Technical Data Sheet 

Safety Data Sheet

Color Chart